Quick Answer: What Is A Chase In Construction?

What does Chase mean in construction?

A chase, as it pertains to new home construction, is a vertical space in a wall that provides an area for pipes or wires to run through. These chases are placed in a strategic way so that cables can be gathered and run together. A chase is simply installed from a single open space to another.

What is a chase wall?

A: Chase walls are typically comprised of a double row of framing studs, providing extra depth of wall that serves as a vertical and horizontal shaft for plumbing and other service installations. These aligned studs are then cross-braced with gypsum board. The braces are a nominal 24 inches long by 12 inches wide.

What is the difference between a shaft and a chase?

Dictionary definition: (a continuous recess: Harris) a vertical or horizontal enclosure/recess (of rated or non-rated construction) with which to conceal/route, plumbing, electrical, etc.; shafts tend to be vertical while chases may be either.

Whats does Chase mean?

Verb (1) chase, pursue, follow, trail mean to go after or on the track of something or someone. chase implies going swiftly after and trying to overtake something fleeing or running. a dog chasing a cat pursue suggests a continuing effort to overtake, reach, or attain.

You might be interested:  Question: What Are Construction Jobs?

What is a chase cut out?

Cut to the chase” is a phrase that means to get to the point without wasting time. The saying originated from early film studios’ silent films. It was a favorite of, and thought to have been coined by, Hal Roach Sr.

What is a chase Funko Pop?

A Chase Pop is a rare variant of a common Funko Pop figure, whereby its design differs slightly to the original figure it’s based upon.

How deep should you chase wire?

Vertical chases should be no deeper than one third of the wall thickness – with standard 100mm bricks and blocks, that going to be 33mm, which is quite deep anyway – that’s not allowing for any plaster coating which could be 10mm so the maximum depth then works out at 36mm from the front face of the plaster.

Do electricians chase walls?

How to Chase out a Wall. Cutting a chase is a simple job and most electricians will own a chasing tool. The chasing tool seen in the image below is basically an angle grinder with two parallel blades. The depth of the blades can be set, a hoover hose plugged into the end and off you go.

What is a shaft wall?

Shaft wall systems are a specific category of interior fire-rated partitions designed to be installed from only one side. A vertical shaft wall system starts at one corner or up against an adjacent column or wall using a vertical segment of tabbed track.

What is another name for Chase?

Frequently Asked Questions About chase



Some common synonyms of chase are follow, pursue, and trail. While all these words mean “to go after or on the track of something or someone,” chase implies going swiftly after and trying to overtake something fleeing or running.

You might be interested:  Quick Answer: How To Make A 3d Fish Out Of Construction Paper?

What is the chase in dating?

Chasing someone is a thrill… one that you probably don’t get to revel in when you’re in a secure relationship. Scientifically, having a crush and falling for someone releases feel-good hormones like dopamine and adrenaline. Part of the chase is a chase for those brain chemicals, to feel those euphoric feelings again.

What type of verb is Chase?

chase ​Definitions and Synonyms ​‌‌

present tense
I/you/we/they chase
he/she/it chases
present participle chasing
past tense chased

Leave a Reply

Your email address will not be published. Required fields are marked *