Question: How To Build A Cement Pond?

How thick does concrete need to be for a pond?

you should be 9-10 inches with one or even two layers of mesh to be safe. I did not use a DPM as the stone is free draining but if you are below the water table it may save you problems when lining the pond.

How much does it cost to build a concrete pond?

Pond Construction Costs by Type

Pond Type Expense Factors Affecting Cost
Swimming $50 per square foot Depth, liner, labor.
Farm $2,000 – $10,000 Liner, labor, size, fish.
Backyard $50 – $5,160 Liner, labor, size.
Lake $3,000 – $8,200 per acre Size, depth.

How do you waterproof a concrete pond?

A: The polyliner isn’t necessary to waterproof the concrete, but if you must, I would suggest using a product like Thoroseal, which can be found in most construction supply stores. It’s a cement-based product and does a good job of weatherproofing. You apply at least two coats to the concrete surface.

You might be interested:  Question: How Much Can It Cost To Build A House?

Can you make a pond with cement?

Concrete can make a durable and long lasting garden pond, although the effects of freeze thaw action should be taken into consideration. There are three main types of concrete pond. Cover wire netting with further 50mm layer of concrete and smooth with trowel.

Will a concrete pond hold water?

Untreated concrete is usually quite porous, absorbing and allowing water to slowly seep through microscopic spaces, but it can be made highly resistant to the passage of water by using fine aggregates and waterproofing additives to close the pores.

Can I use chicken wire to reinforce concrete?

Materials such as chicken wire, stucco mesh, wire screening, expanded metal, fence wire or fiberglass cloth should never be used as primary reinforcement because their properties are too variable or they are not sufficiently strong. You cannot rely on these materials.

How deep should a 1 acre pond be?

Preparing for a Farm Pond



The pond should be at least 1 acre in size. Smaller ponds can work, but pose some difficulties in managing the fish population. Fish ponds should be at least 6 feet deep, but no more than 12 to 15 feet deep.

Do you need to seal a concrete pond?

You don’t need to re-seal your pond till years, once filled after application of Concrete fish pond sealant. You will have a great fish pond that will prove entertaining and easy to maintain for years.

How deep should I dig my pond?

Having most of a ponds depth between 10-12 feet is ideal. The ideal average water depth is 8 feet. Some people love beach areas. Just make sure you are prepared to treat these areas for weeds and algae.

You might be interested:  Often asked: How To Build An Outdoor Shower Drain?

What can I mix with cement to make it waterproof?

For the masonry of exterior walls with hard brick one often uses 1 part cement, 3.5 parts sand, 0.25 part lime. While for the same job, but with much softer limestone, a completely different mixing ratio is advised, namely 1 part cement, 9 parts sand, 2 parts lime.

What is the best pond sealer?

The Most Effective Pond Sealer in the Industry: Crushed Sodium Bentonite. Crushed sodium bentonite is a natural substance that has numerous applications. It is commonly used as a sealant in ponds that experience high rates of water seepage.

Is cement safe for pond fish?

Re: is cement safe for pond.



i would not anticipate any problems with the area you describe and once cured poses little risk to fish. you may want to keep an eye on ph for a while as lime from cement can raise ph.

Is cement poisonous to fish?

Often a freshly installed concrete waterfall is to blame, or a newly slabbed area adjacent to the pond. This is because the water that has run over the new cement and into the pond will have leached some lime from the cement. Lime will alter the PH value of the water making it deadly for the fish.

How do you cement rocks around a pond?

To cement the stones around your pond, start by mixing up half of an 80 pound bag of Quick Crete. Pour the 40 pounds of concrete into a metal container, add water and mix it together. Add just enough water so that it is not too runny. Put down a base of cement around the pond where you will lay the stones.

You might be interested:  How To Build A French Drain Around Foundation?

How do you secure a concrete liner to a pond?

The simplest method for securing your pond liner is an anchor trench. This runs around the outside of your pond, approximately 500mm from the edge, and should be dug to about 300mm deep by 300mm wide. The liner should lap into the trench, be covered by a layer of matting, then the soil replaced over the liner.

Leave a Reply

Your email address will not be published. Required fields are marked *