Quick Answer: How To Build A Bulkhead In The Kitchen?

What is the purpose of a bulkhead in a kitchen?

A kitchen soffit often called a “bulkhead,” is a portion of the ceiling that has been built lower than the area around it. They can protrude several inches beyond the cabinets and make the kitchen look cramped, dated, and unsightly.

How are bulkheads built?

Bulkheads are normally constructed in the form of a vertical wall built in concrete, stone, steel or timber. The concrete, steel or timber walls can be piled and anchored walls, whereas the concrete and stone walls can also be constructed as gravity walls. Example of bulkhead structure constructed by Gabion mesh boxes.

What is the difference between a soffit and a bulkhead?

Soffits describe the area between the top of cabinets and the ceiling. Bulkheads describe the structure that fills in that area. Instead of empty space above cabinets, bulkheads are solid and box-like structures that fill in that wall soffit.

What does a bulkhead cost?

Substantial residential seawalls or bulkhead for salt water and properly built tend to cost in the range of $500 to $1,200 per lineal foot. It is best to contact your local, licensed and insured marine contractor to obtain an estimate for your property.

You might be interested:  FAQ: How To Build A Horse Round Pen?

What should I hang on my kitchen soffit?

Here are some creative ideas for kitchen soffits:

  • Add Moulding Border.
  • Paint them.
  • Add new cabinets.
  • Cover Them With Artwork.
  • Build a window.
  • Place Plants.
  • Cover Soffits with Beadboard.
  • Use Sculptures or Books.

What do you do with space above kitchen cabinets?

11 Smart Ways to Use the Space Above Your Cabinets

  1. Display serving pieces.
  2. Use canisters to conceal clutter.
  3. Or bust out the baskets.
  4. Show off a collection.
  5. Display cookbooks.
  6. Store your wine.
  7. Grow something.
  8. Add another shelf.

How do you fill the gap between kitchen cabinets and ceiling?

You can build the cabinets to the ceiling (most expensive option), keep the area open (no cost!), build a soffit to match the cabinets, or add a drywall soffit.

How deep is a bulkhead?

The standard bulkhead, or soffit depth, in this case is at least 13 inches. Minimum depth of upper cabinets is 12 inches, allowing for a ¾-inch trim piece between the cabinets and the soffit.

What is the meaning of bulkhead?

1: an upright partition separating compartments. 2: a structure or partition to resist pressure or to shut off water, fire, or gas. 3: a retaining wall along a waterfront. 4: a projecting framework with a sloping door giving access to a cellar stairway or a shaft.

How do you make a bulkhead in water?

A bulkhead keeps the water at bay while holding the soil in place.

  1. Dig a trench.
  2. Dig holes for the anchors.
  3. Install the anchors.
  4. Install the back wales.
  5. Lay down the sheeting.
  6. Install the front wales.
  7. Drill holes.
  8. Insert the tie rods.
You might be interested:  Readers ask: How Long To Build Glutes?

How deep should a kitchen soffit be?

Options Planning Soffits: A soffit is the bulkhead between the ceiling and the top of the cabinets. Distance from floor to soffit should be at least 84″. Allow another 14″ if you install an 84″ cabinet. Depth may vary – normal is 13″ which is 1″ deeper than a wall cabinet.

How much does it cost to build a soffit?

Replacing your soffit generally costs about $20 to $30 a linear foot installed, while replacing your fascia costs about $15 to $25 a linear foot installed. Prices for the project depend on a number of factors, including the materials used and the size of your house.

What is Asoffit?

The fascia board is the one mounted at the point where the roof meets the outer walls of the house and is often called the ROOFLINE. However most people refer to it by the name of the main board that carries the gutter – the fascia or fascias.

Leave a Reply

Your email address will not be published. Required fields are marked *