Quick Answer: How To Build A Deck For Beginners?

Can a beginner build a deck?

Decks can be single level or multi-level; they can be some of the simplest “first” projects for a beginner, or elaborate examples of sophisticated craftsmanship. Decks are quite often the first project many beginning do-it-yourselfers tackle, but it’s important to understand the basics of deck construction.

Is it cheaper to build your own deck?

According to Remodeling magazine’s 2020 cost vs. value report, on average, a homeowner can recoup around 67% of the cost of a composite deck or almost 72% of the cost of a wood deck. Because home buyers are willing to pay top dollar to own a deck.

How do I build a simple deck?

Exterior Wood Sealers

  1. Stunning DIY Deck Built on a Budget.
  2. Step 1: Create Your Deck Plan!
  3. Step 2: Place the Deck Footings.
  4. Step 3: Cut and Lay Your Joists.
  5. Step 4: Re-Bury Those Deck Piers.
  6. Step 5: Prep Your Deck Wood.
  7. Step 6: Waterproof the Bottom of Your Deck Planks.
  8. Step 7: Lay Your Decking Planks.
You might be interested:  Quick Answer: How To Build Roads In Frostpunk?

Can I build a deck yourself?

Do It Yourself Deck Building. There is no dispute, a professional deck builder will do a better, faster job than you can. If you are considering building a deck yourself, then most likely you are up to the task, as this type of job just takes a lot of sweat and a little bit of want to.

How long does it take to install a deck?

A 12 x 24-foot one typically requires two people to complete and will take anywhere from one to three weeks depending on experience and skill level. A professional team can usually have the project done in a week or less.

What is the cheapest way to build a deck?

Treated wood is going to cost extra money but you can also use untreated wood and save some money. Instead, you can use sealants and other cheap materials to prevent any rot or decay. You also have the option of making your own sealants at home using pigments, mineral spirits or linseed oil among other things.

How much does a 12×12 deck cost?

Composite Decking Costs at a Glance

National Average Cost $8,064
Minimum Cost $5,821
Maximum Cost $10,826
Average Range $6,611 to $8,901

How much does a 20×20 deck cost?

Cost To Build A Deck By Size

Deck Size Square Feet Average Cost
12×20 240 $3,600 – $8,400
14×20 280 $4,200 – $9,800
16×16 256 $3,840 – $8,960
20×20 400 $6,000$14,000

How difficult is it to build a deck?

In general, building a deck is fairly straightforward — you make a basic frame using standard-sized beams and top it off with some sort of decking material. In reality, they range from simple to complex. A properly built deck requires some knowledge of woodworking, concrete, landscaping, and engineering.

You might be interested:  Question: How To Build Heavy Duty Garage Shelves?

Can I use 2×6 for deck joists?

2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decks use 16″ on center spacing for joists. Most decking is not strong enough to support longer spans than 16″.

How many footers do I need for a 12×12 deck?

For an attached 12 x 12′ deck, you’ll need at least 3 footings, plus at least 2 more if you’re planning on building stairs with it. If your deck will be a different size, it’s easy to figure out how many you’ll need.

What is a good size deck?

A small deck intended for holding a round dining table should measure at least 144 square feet. However, the average size of a deck should range between 300 and 400 square feet. The general rule of thumb for constructing a deck is that it should not be bigger than the largest room in your house.

What is the cheapest deck material?

What’s the cheapest decking material? The cheapest decking material is usually pressure-treated pine, which can cost as little as $2 to $3 per square foot. There are solid wood and composite options that run $4 to $5 per square foot.

How much does it cost to hire someone to build a deck?

Cost of Hiring a Contractor



The average price to build a deck with pressure-treated pine is about $30 to $35 per square foot. That price includes the wood planks, supporting framework, railings and all labor costs. Cedar, redwood or wood composites are more expensive, ranging from $35 to $60 per square foot installed.

Leave a Reply

Your email address will not be published. Required fields are marked *