Quick Answer: How To Build A Round Ottoman?

How much fabric do I need to cover an ottoman?

Yardage Estimates

Upholstered Furniture
Sectionals: 24 – 34 yards Square Ottoman: 2.5 yards
Benches (with backs): 6 yards Benches (no backs): 3 yards
Club Chairs: 6 – 8 yards Club Chairs with Ottomans: 8 – 9 yards
Basket Chairs: 5 yards Swivel/Rockers: 8 yards

Can you turn a regular ottoman into a storage ottoman?

If you have a regular ottoman, you can easily convert it to a storage unit.

How do you cover an ottoman?

Lay Out the Fabric for the Bottom Piece



Lay the fabric right-side down on your work surface. Place the ottoman on its side on top of the fabric. Make sure there is enough fabric to cover it. You can wrap it around the whole ottoman to make sure it fits, or measure one side and multiply by 4.

How do you slipcover a round ottoman?

Step by Step:

  1. Place your ottoman on top of a piece of paper or fabric and trace around it adding 1/2″ all around.
  2. Measure the circumference of your ottoman and add 3 extra inches.
  3. Determine the desired depth of the slipcover and add 1″
  4. Cut out the fabric top.
  5. Cut out the fabric that will be the side band of the slipcover.
You might be interested:  Question: How To Build A Cribbage Table?

What can I do with a large ottoman?

With some thinking outside the square, your ottoman can offer you a variety of uses you may never have considered.

  • Foot stool. We’ll tackle the most common purpose of the ottoman first.
  • Extra hide away seating.
  • Coffee table.
  • Additional storage.
  • Bed bench.
  • Aesthetics.
  • Sofa bed transformation.

How do you make a small ottoman?

How to build an ottoman

  1. Start by building the short sides.
  2. Attach the long aprons with pocket holes and wood glue to create the box.
  3. Attach a 1/4″ plywood bottom for the storage frame using wood glue and finish nails.
  4. This is also a good time to paint the feet to match your furniture.

How do you turn a coffee table into an ottoman?

Turn an Old Coffee Table Into an Upholstered Storage Ottoman

  1. Materials Needed.
  2. Determine Height and Cut Legs.
  3. Create Storage Box.
  4. Cover the Ottoman’s Sides.
  5. Mark Pattern for Tufting.
  6. Add Foam and Batting.
  7. Prep Fabric Cover.
  8. Add Fabric Cover.

What is the best fabric for an ottoman?

If you have children or pets that are likely to rub up against or crawl over your ottoman, your best options are cotton or linen – ideally with a removable cover for easy machine washing.

How do you calculate fabric for an ottoman?

Divide the measurement by 36 to determine the number of yards needed. For example, if the pattern pieces cover an area of floor equal to 72 inches in length, then divide 72 by 36 to get 2, the number of yards of 54-inch wide fabric needed for the ottoman.

You might be interested:  Quick Answer: How To Build Your Back Muscles?

What is the standard size of an ottoman?

Ottomans come in a large variety of shapes and sizes that range in height from 13”-20” (33-51 cm). Most ottomans are sized to pair with their coordinated furniture sets and are designed with matching heights.

How do you install Ottoman hinges?

How To Install Hinges on the Inside of a Storage Ottoman

  1. Remove the ottoman lid and set it aside.
  2. Position one hinge inside the storage ottoman 1 or 2 inches from a corner along the top edge of the ottoman, where it will connect to the lid.
  3. Screw the hinge into place using the longest screws possible.
  4. Lay the ottoman on the same side on which you installed the hinges.

What are Ottomans used for?

An ottoman is often an underappreciated living room staple. The piece of furniture is actually a multipurpose gem: It can be used as a cocktail table substitute, a decorative footstool for a sofa, or space-saving storage.

Leave a Reply

Your email address will not be published. Required fields are marked *