Quick Answer: How To Build Trex Stairs?

Do they make composite stair stringers?

Composite deck stairs are typically made from 2 x 12 pressure-treated stringers spaced about 8 to 16 inches apart. They rest on a solid foundation and are attached to the deck with hangers. They have risers (also called toe kicks), treads and railings. Stairs should be at least 36 inches wide.

Are Trex stairs slippery?

Assuming the enamel paint with a grit additive will adhere to your particular Trex product, that’s a reasonable for a first-generation Trex deck where nearly the entire surface is slippery.

Does Home Depot sell Trex?

Trex – Decking – Lumber & Composites – The Home Depot.

How do you attach stair stringers to joists?

Stair Stringer Attachment



If your first tread steps down from the deck, you must extend the rim joist to create a solid surface below the deck rim to attach it to. You should attach 2×6 or 2×8 support framing under the rim flush to the bottom of the stringer. The stairs will hang here.

How much does it cost to build a Trex deck?

A typical 24′ x 12′ deck (288 square feet) built with Trex decking will cost between $4,244 and $10,826 for materials and installation. Trex decking materials cost $8.25 per square foot on average, while the average labor cost for decking is $7.52 per square foot.

You might be interested:  Often asked: How To Build A Paper Glider?

What is better Trex or TimberTech?

Which Is Better, Trex Or TimberTech? TimberTech is considered a superior choice to Trex. This is because TimberTech offers more realistic-looking decking boards and they’re covered by a longer warranty period. TimberTech also offers a variety of sizes and colors for you to pick from.

What are the disadvantages of composite decking?

Cons of Composite Decking

  • A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood.
  • Composites aren’t natural.
  • Composite decks aren’t completely maintenance free.
  • You’ll need to comparison shop.

How do I make my Trex deck less slippery?

The best strategy for a slip-resistant deck surface, whether made of wood or composite material, is to perform routine cleaning and maintenance.

  1. Sweep and Clear Debris.
  2. Clean your Deck Annually.
  3. Apply Anti-Slip Products.

Do deck stairs have to land on concrete?

Stair landings must be at least as wide as the stair and at least 3 feet deep. On the other hand, solid, flat, and stable materials, such as concrete, flagstone, pavers, or brick, can be installed with a measurable slope and will not usually shift under the weight of an off-balance person completing a stairway descent.

Leave a Reply

Your email address will not be published. Required fields are marked *