Readers ask: How To Build A Deck Home Depot?

How much does it cost to build a deck Home Depot?

How much does it cost to build a deck? The cost of building a deck varies depending on its intended purpose, size, style and material, as well as your location. A simple deck built with basic, pressure treated wood could cost just $12 to $15 per square foot.

How much will a 12×12 deck cost?

Cost To Build A Deck By Size

Deck Size Square Feet Average Cost
10×10 100 $1,500 – $3,500
10×12 120 $1,800 – $4,200
12×12 144 $2,160$5,040
12×20 240 $3,600 – $8,400

Is it cheaper to build your own deck?

According to Remodeling magazine’s 2020 cost vs. value report, on average, a homeowner can recoup around 67% of the cost of a composite deck or almost 72% of the cost of a wood deck. Because home buyers are willing to pay top dollar to own a deck.

You might be interested:  FAQ: How To Build A King Platform Bed?

What is the cheapest way to build a deck?

Treated wood is going to cost extra money but you can also use untreated wood and save some money. Instead, you can use sealants and other cheap materials to prevent any rot or decay. You also have the option of making your own sealants at home using pigments, mineral spirits or linseed oil among other things.

How much does it cost to hire someone to build a deck?

Cost of Hiring a Contractor



The average price to build a deck with pressure-treated pine is about $30 to $35 per square foot. That price includes the wood planks, supporting framework, railings and all labor costs. Cedar, redwood or wood composites are more expensive, ranging from $35 to $60 per square foot installed.

Can I build my own deck?

Anyone with some basic hardware and construction skills can build a deck, provided you do adequate planning. I would hire professionals for a complex deck, but for the simple everyday variety, doing it yourself isn’t as hard as you think thanks to some time-saving products and sites covered here.

What is a good size deck?

A small deck intended for holding a round dining table should measure at least 144 square feet. However, the average size of a deck should range between 300 and 400 square feet. The general rule of thumb for constructing a deck is that it should not be bigger than the largest room in your house.

How much does a 10×20 deck cost?

Deck Size Cost Estimator

Dimensions (Square Footage) Total Square Feet Average Price Range
10×20 (200) 200 $8,000 – $12,000
12×20 (240) 240 $9,600 – $14,400
16×16 (256) 256 $10,240 – $15,360
14×20 (280) 280 $11,200 – $16,800
You might be interested:  Question: How To Build A Better Boy Watch Online?

Can I use 2×6 for deck joists?

2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. Most decks use 16″ on center spacing for joists. Most decking is not strong enough to support longer spans than 16″.

How many footers do I need for a 12×12 deck?

For an attached 12 x 12′ deck, you’ll need at least 3 footings, plus at least 2 more if you’re planning on building stairs with it. If your deck will be a different size, it’s easy to figure out how many you’ll need.

What materials do I need to build a 12×16 deck?

Your deck can be built with pressure-treated cedar or redwood, ipe or jarrah woods or even composites. Composite materials, such as vinyl, are also an option.

Does a deck add value to a home?

value report that, on average, homeowners spend just under $11,000 to add new wooden decks, but only see the resale value of their homes increase by $9,000, which is about 82% in recouped costs. Though, if a home already has a wooden deck, choosing to repair or refinish the deck is a smart investment.

How long does it take to build a deck yourself?

The average deck runs about $7,000. You can save most of that cost by putting in some serious time and sweat equity. A 12 x 24-foot one typically requires two people to complete and will take anywhere from one to three weeks depending on experience and skill level.

What is the cheapest deck material?

What’s the cheapest decking material? The cheapest decking material is usually pressure-treated pine, which can cost as little as $2 to $3 per square foot. There are solid wood and composite options that run $4 to $5 per square foot.

Leave a Reply

Your email address will not be published. Required fields are marked *