- 1 Can I build a deck directly on the ground?
- 2 What is best to put under decking?
- 3 What size joists do you use for decking?
- 4 What size wood should I use for decking frame?
- 5 How many footings do I need for a 12×16 deck?
- 6 How high should a deck be off the ground?
- 7 How do you prepare the ground under a deck?
- 8 What to put under a deck to prevent weeds?
- 9 How do I cover the ground under my deck?
- 10 How far can a 2×6 decking span without support?
- 11 Can you build a deck with 2×4?
- 12 How far can a 2×6 floor joist span without support?
- 13 Should I use 2×4 or 2×6 for deck?
- 14 How deep do decking posts need to be?
- 15 How far apart should deck posts be?
Can I build a deck directly on the ground?
Floating decks can be set directly on the ground or, preferably, a bed of gravel. But it’s best to support the deck on concrete blocks. This keeps the wood off the ground and away from moisture so the wood stays drier and lasts longer.
What is best to put under decking?
If you’re laying your deck straight onto the ground, cover the area with a layer of weed control fabric. Then add 40 mm to 50 mm of gravel on top. The other method is to create concrete pads for the deck to sit on top of. This will reduce the likelihood of moisture seeping into the frame and causing damage.
What size joists do you use for decking?
How do I keep them even? In general terms, joists spaced 16 inches on center can span 1.5 times in feet their depth in inches. A 2×8 up to 12 feet; 2×10 to 15 feet and 2×12 to 18 feet. The larger the deck, the larger the joists.
What size wood should I use for decking frame?
Generally speaking 100mmx50mm needs supporting at about 1.5-2m if the joists are on 400mm centres. The grade of wood has to be taken into account. c16-24 is stronger and more durable than other non-graded types. Always err on the side of safety.
How many footings do I need for a 12×16 deck?
A standard deck will need four footings parallel to the house, but they will need to be temporarily braced by 6 inch-by-6 inch posts. Using doubled boards, you will then need to build beams on the top row of the posts to frame the edges of the deck. These must be topped with adjustable post caps.
How high should a deck be off the ground?
There is no standard height for a “grade-level” deck—the maximum measurement from grade to the deck surface could be 6 inches, 12 inches, 24 inches, or more. But generally speaking, I apply the term to decks that are up to 30 inches above grade, since guardrails are required for any decks that are higher than that.
How do you prepare the ground under a deck?
To suppress the growth of unwanted vegetation underneath the deck, the area should be covered with landscaping fabric. First, add a layer of coarse sand for drainage. Then cover the sand with landscaping fabric. Bury the fabric under several inches of gravel.
What to put under a deck to prevent weeds?
Leaving the area below your deck uncovered can allow weeds and other plants to sprout, eventually pushing up between the deck boards. Gravel installed over a layer of fabric or plastic sheeting helps keep weeds in check and prevents the plastic or fabric from blowing out of place.
How do I cover the ground under my deck?
A layer of crushed gravel, with or without plastic or weed barrier cloth, is the best choice for using under a deck. It sheds moisture instead of absorbing it, keeps the area under the deck drier, and won’t decay.
How far can a 2×6 decking span without support?
A decking board made up of 2x6s can span a maximum distance of 24 inches from joist to joist.
Can you build a deck with 2×4?
For the deck surface, you can use 2x4s, 2x6s, or 5/4x6s. The 5/4 decking (pronounced “five-quarter”), available in cedar and pressure-treated fir, is 1 inch thick and 5-1/2 inches wide with rounded edges that make for a splinter-free surface.
How far can a 2×6 floor joist span without support?
How far can a 2×6 Rafter span without support? The table states that 2 X 6 rafters spaced 16 inches on center (o.c) can span a maximum distance of 13 feet 5 inches. 5 дней назад
Should I use 2×4 or 2×6 for deck?
2x4s are never ok for floor joists! 2×6 is iffy and may not meet minimum code. I agree with Marksr, that 2×6 would be minimal. Use a 4×6 rather than 2-2×6’s for your beam.
How deep do decking posts need to be?
Special care must be taken when digging out the holes for the decking posts as services such as gas, electric or water could be buried underneath the soil or storm water drain or soil pipes. The post holes need to be 700mm deep and the decking posts are 100mm*100mm treated timber.
How far apart should deck posts be?
When building your deck frame, the maximum spacing of Deck Posts for should be no further than 8 feet apart.