Readers ask: How To Build A Fast Derby Car?

How do you make a fast derby car?

10 Tips and Tricks to a Fast and Cool-Looking Pinewood Derby Car

  1. Bake your block.
  2. Max out your weight at the regulation 5 ounces.
  3. Use all of the graphite (dry lubricant is usually allowed).
  4. Sand and polish your wheels and axles.
  5. Check alignment.
  6. Spend time on sanding.
  7. Use a high-quality paint.
  8. Add decals!

What is the fastest Pinewood Derby car?

The Black PRO Car is our fastest pinewood derby car. It pushes the Speed Limit! It is track-tested car ready to race featuring our race winning PRO friction-free BSA Ultra-Lite graphite-coated wheels and PRO BSA graphite-coated grooved axles.

How fast can a Pinewood Derby car go?

The Speed of Pinewood Derby Cars



The distribution plot below shows a range of speeds from 177 mph to 229 mph, with most cars exceeding 200 mph.

Are Bent Axles legal in Pinewood Derby?

No. Bent axles are not allowed in either racing class.

You might be interested:  Often asked: How To Build A Wood Deck Porch?

What is the best derby car?

Best Cars for Demo Derby

  • Chrysler Imperial — The 1964 – ’68 Imperial is notoriously tough, to the point that most derbies banned it.
  • Ford LTD/Crown Victoria — The Panther chassis is stupid cheap, and cop car tough.
  • Chevy Impala — Box or bubble, you can’t go wrong beating on an Impala.

Is a heavier Pinewood Derby car faster?

Weight and Placement in Pinewood Derby Cars. One of the most fundamental rules in the Pinewood Derby is the maximum weight limit of 5.000 ounces, or 141.643 grams. Simple physical principles dictate that a heavier car will run faster.

Should I bake my Pinewood Derby block?

Should I bake the pinewood derby block? The short answer is no, do not bake the block. The idea behind baking the block is to remove moisture which will make the block lighter. You can then add more weight to the back of the car.

Where should the weight be on a Pinewood Derby car?

Weight should be placed towards the rear of the car. You can drill the weight holes in the bottom, side or rear of the car as shown in these examples. Stay at least 1/8″ away from the axle slots.

What is the most aerodynamic shape for a Pinewood Derby car?

But aerodynamics rule the day, and the best shape is a simple wedge. Just like a spoiler on the rear of a sports car, the wedge shape allows as much air to flow over the top of the car without hinderance while keeping the car pinned to the track. Our wedge tapers from 5/16-in. to 7/8-in.

You might be interested:  Quick Answer: How To Build A Foam Machine?

Where should the center of gravity be on a Pinewood Derby car?

Center of gravity placement should be between 1⁄2″ – 1″ in front of the rear axle. This is true for all wheel base types. Whether you are using a standard wheelbase or an extended wheelbase.

How much weight does paint add to a Pinewood Derby car?

Paint only adds a few grams (hundredths of a ounce). We generally weight up to 4.9 oz and then do the last weight adjustment at check-in.

What is the maximum weight for a Pinewood Derby car?

MAX OUT YOUR CAR’S WEIGHT AT 5 OZ



In most races, a Pinewood Derby car’s weight is limited to 5 ounces. If your car weighs less than that, add coins or other weights.

How much does a Pinewood Derby car weigh out of the box?

How much does a Pinewood Derby car weigh out of the box? The official Pinewood Derby car weighs about 3.5 ounces without any modifications. The wooden block is about 3.3 ounces, and the wheels and axles add about 0.2 ounces.

Leave a Reply

Your email address will not be published. Required fields are marked *