Readers ask: How To Build A Foam Cannon?

What soap do you use in a foam cannon?

You can’t go wrong with any foam soap from the Chemical Guys, but the Honeydew Snow Foam Car Wash Soap and Cleanser really takes the cake for foam cannons. With a simple spray, it’s powerful enough to eliminate environmental contaminants, grime, and dirt.

What is the soap to water ratio for foam cannon?

If this is your first time using a snow foam cannon or the foam gun on your pressure washer, it can be a challenge to get the right snow foam consistency. We recommend starting with a baseline mixture of 1:16, that is, 1 part concentrate to 16 parts water. Dirtier vehicles might benefit from 2:16 or 3:16 mixtures.

What do you need for a foam cannon?

You should only use car soap (obviously). To get thick foam from your foam cannon, you must choose a car soap which is high sudsing and highly concentrated. Diluted car soaps will result in a watery foam and not the thick ‘shaving cream’ consistency that everyone loves!

You might be interested:  Often asked: How Much To Build A Food Truck?

Can you use a foam cannon without a pressure washer?

Intense foaming action without the need for a pressure washer makes this product an easy choice. Simply hook it up to your garden hose for delightful foamy fun. Chemical Guys include not only the foam gun but also a garden hose spray nozzle you can use separately or as part of the foam gun system.

Do you need special soap for a foam cannon?

You can use almost any soap. I personally use 3d’s wash and wax i bought in a 55 gallon drum for like $44. I use three ounces inside of the lancer and the rest water and it gives a great amount of foam. More then enough for me to use a nanoskin mitt and clay the car then simply rinse it all off.

Can I use any car soap in a foam cannon?

Yes, you can use any car shampoo/soap in a foam gun. Some will ‘foam‘ more than others.

Can you put dish soap in foam cannon?

Dawn or PAmolive would be fine. The problwm with this is there will strip lsp`s well It takes a few dawn washes for 845I. Also if you let it dwell to long in may dry out plastic moldings.

Should you rinse before snow foam?

Pre-wash using Snow Foam



Before you get your buckets and wash mitt out you should be looking at giving the car a pre-wash. This is essential which helps to soften dirt and any larger particles that are on the paintwork and wheels and draw them away from the surface, in effect an initial touch less wash.

You might be interested:  How To Build An Effective Website?

Can you use snow foam without a pressure washer?

Without a pressure washer, you won’t be able to use a foam cannon, but what you could use is a foam blaster. These work in a similar way to foam cannons; however, they connect to your garden hose. The foam will not be as thick as from a foam cannon, but it may help reduce swirls.

Is it worth using snow foam?

The purpose of a snow foam is to safely remove as much as dirt as possible before the contact wash stage. In turn, this helps to reduce swirling and light scratches on the paintwork – improving the final finish. So yes, as a prewash process, snow foam is definitely worth it!

Does a foam cannon really work?

Reduced risk of scratching paint



It’s the soap that really does all the work to remove dirt –no scrubbing required. Since a foam cannon applies much more soap than a wash mitt ever could (even those that hold a lot of suds), you really don’t have to use any pressure at all when using a mitt.

Does foam clean better?

The answer is no. The amount of foam has almost no effect on the cleaning ability of the product. Having a lot of foam isn’t vital for actually doing the cleaning, it’s mostly for aesthetic. In fact, in some cases, the presence of foam will reduce the ability to clean.

Leave a Reply

Your email address will not be published. Required fields are marked *