Readers ask: How To Build A Shelving Unit For Garage?

What kind of wood should I use for garage shelves?

1/2″ plywood should be plenty sturdy enough for most items, or use 7/16 OSB sheathing. The OSB is cheaper but has a rougher surface and doesn’t look as nice. One more very important thing. This design basically puts all the weight of your stored items on the nails holding the shelves together.

How deep should garage shelves be?

Shelves should be deep enough to safely store items, yet not so deep that items will get hidden behind each other. For a garage, 16” depth is ideal for the storage of large items and 12” depth is ideal for smaller items. Adjustability is very important to maximize the use of space.

Is it cheaper to build or buy shelves?

Building your own shelves can be beneficial for some, but may not be the right choice in every situation. Lower Cost – Generally, buying the materials for your garage shelves should be cheaper than purchasing prefab – just make sure you do everything right the first time.

You might be interested:  Often asked: How To Build A Real Arc Reactor?

How thick should Wood be for shelves?

Thick Wood Bookshelves



Use 3/4-inch thick materials for shelves and bookcase structure. If you’re using hardwood solids, it’s OK to boost the thickness to 1 1/4 inch for almost unlimited support. This type of shelf looks more like a mantel and is expensive, but adds the opulent look of craftsmanship.

What is the best garage shelving?

Our Top Picks

  • Best Wall Mount. FLEXIMOUNTS 2-Pack 2x6ft Garage Shelving.
  • Best Ceiling Mount. FLEXIMOUNTS 4×8 Overhead Garage Storage Rack.
  • Best Freestanding. Seville Classics 5-Tier Steel Wire Shelving.
  • Best Adjustable. FLEXIMOUNTS 3-Tier Storage Wall Shelves.
  • Best Custom System. 2x4basics Custom Shelving and Storage System.

How do I maximize my garage space?

10 Helpful Tips to Maximize Your Garage Space

  1. Build garage cabinets.
  2. Install wall organizers.
  3. Add overhead or ceiling storage.
  4. Create a folding workbench.
  5. Get magnetic boards for the small parts.
  6. Go mobile with work areas.
  7. Upgrade to adjustable shelving.
  8. Install pegboards and hooks.

How much weight can a 2×4 shelf hold?

A 10 foot long 2×4 carrying a uniform load of 40 pounds per foot (400 lbs total load) will have a maximum bending moment at the center of the span of 1000 ft-lbs. The same 10 foot long 2×4 with a point load of 400 lbs at the center will experience a maximum bending moment of 500 ft-lbs.

How thick should Plywood be for garage shelves?

We use 1/2″ plywood for the 16″ width shelving – perhaps go up to 5/8″ or 3/4″ if you do 24″ wide shelving or have especially heavy loads destined for these shelves.

You might be interested:  Readers ask: How To Build A Portable Mini Golf Course?

What is a good shelf depth?

Shelf depth is determined by the size of the items to be stored, generally within the range of 6 to 24 inches. Shelf depth for a general purpose bookshelf is usually 10 to 12 inches. Shelf spacing will generally range from 7 to 15 inches with 8 to 12 inches being common for bookshelves.

Is MDF good for garage shelving?

Mdf tends to sag over time and is affected by humidity. Laminated plywood is fine, just more expensive and will show stains quicker than osb from all the oils and chemicals stored in a garage. OSB also suffers from humidity and don’t let it get soaked because it’ll get destroyed. Even still OSB is a fine choice.

What is the cheapest wood for shelves?

What is the cheapest wood for shelves?

  • Pine. Pine is one of the most affordable and popular softwoods in the market.
  • Plywood. Plywood is another good option for people who are interested in making their own shelves.
  • Cherry. Although cherry is a hardwood, it is lightweight and easy to use.
  • Koa.
  • Red Oak.
  • Paduak.
  • Mahogany.

Leave a Reply

Your email address will not be published. Required fields are marked *